1963–1964 Ford Galaxie 500 & 500XL Armrest Cap Covers (Driver+Passenger Set)
Couldn't load pickup availability
Vehicle Compatibility
1963-1964 Ford Galaxie 500
1963 Ford Galaxie 500XL
FITS 1963–1964 FORD GALAXIE 500 SERIES MODELS LISTED ABOVE
What's Included?
(2) Armrest Cap Covers – Driver + Passenger Set
(1) Tube of Silicone Adhesive
No installation hardware or instructions are included
Description
Clean up the interior of your early ’60s full-size Ford with this pair of molded armrest cap covers, designed for 1963–1964 Galaxie 500 series cars. These covers are made to install directly over your existing front armrests, restoring a uniform, finished look where the original surfaces have cracked, faded, or worn through.
Each cap cover follows the factory armrest profile used on the 1963-1964 Galaxie 500 and 1963 500XL, providing coverage across the top and outer face of the armrest while blending into the surrounding door panel. Once installed, the set refreshes both the driver and passenger sides, making it ideal for restorations or interior freshening on driver-quality cars.
Installation is straightforward: apply the included silicone adhesive to the underside of each cover and press them into place over the existing armrests. The covers rely on your current armrest structure for support, so no additional hardware is required, and none is supplied. Because interior condition can vary significantly from car to car, no instructions are included and final fitting technique is left to the installer.
This driver and passenger armrest cap cover set offers a practical, cost-effective way to improve the look of your 1963–1964 Ford Galaxie 500 or 63 500XL interior without sourcing hard-to-find original trim.
FAQ
All DashSkin dash covers are backed by a LIFETIME WARRANTY, covering products that are installed properly. This warranty covers cracking, warping, and any failure related to extreme temperature and sun damage. Exceptions to this warranty include dash covers that have not been installed yet, dash covers that have been placed into the vehicle but not glued (not installed properly), or dash covers that were installed with an unapproved adhesive (as many adhesives can react with and melt ABS plastic).
40F is the coldest recommended temperature, our adhesives will not fully harden in temps below this. Remember to allow for additional cure time (up to 12 hours) for installing in temperatures this low! Our 100% silicone RTV adhesive uses ambient humidity in the air to cure, so the colder and drier the air is, the more time the silicone will need to fully harden.
In warmer temperatures (60+F) we recommend at least 6 hours. In lower temps (down to 40F) we recommend at least 12 hours.
We ship SAME DAY Monday-Friday until 3pm CST via FedEx Ground and Home Delivery, you can expect delivery in 2-4 business days on average! Shipments to Canada can take 2-7 business days. Please note that these estimates increase during peak holiday traffic.
We recommend cleaning with a wet microfiber cloth only. DO NOT USE ALCOHOL OR SOLVENTS ON THE TOP SURFACE OF THE SKIN as they will strip the paint.
While we typically receive excellent feedback on our color matches, you should be prepared for the match to be a little lighter or darker than your dash. The amount of sunlight vehicles are exposed to can vary substantially, making matching these vehicles a "moving target" so to speak. For this reason, DashSkin offers our dash cover paint in AEROSOL form to make it easy for you to spray other dash components to match your DashSkin for the stealthiest possible install! You can add an aerosol can to your order during checkout
If your order arrives damaged, contact us within 14 days of arrival for a replacement! Email us (customerservice@dashskin.com) or text (918.940.8900) photos of the damage and any damage to the box for an immediate reship. Please do not dispose of the damaged item before being instructed to, as FedEx may need to pick it up for inspection.
DashSkin covers are surface painted with a high quality, UV protected finish that will not flake, peel, or fade. We also sell this paint in aerosol form for your other interior components as needed to match them to the skin and restore the look of your interior!
DashSkin covers are fully protected and warranted against extreme UV abuse, so no additional coatings or treatments are required. We do not recommend applying protectants, as anything with a solvent base can remove the paint.
NO. DashSkin is a rigid, molded plastic dash cover meant to install OVER your old dash to cover cracks and holes. While you can use a DashSkin with a lot of your dash missing, the product cannot be used in place of a dash, as it needs structure to mount to.