If you're looking to remove the grab handle from your 99-06 Silverado/Sierra or 00-06 Suburban/Tahoe/Yukon/Avalanche, we've got you covered. Follow these simple steps to get the job done efficiently. This guide will walk you through the process using basic tools and a little bit of elbow grease.
Tools Needed:
- Flathead screwdriver
Step 1: Remove the AC Vents
- Start by removing the AC vents. Using a flathead screwdriver, gently insert it into the edge of the vent.
- Carefully pop out the vent by prying it away from the dashboard. This should come out relatively easily.
Step 2: Locate the White Buttons
- Once the AC vents are removed, you will see small white buttons located in the corners where the grab handle is attached.
- These buttons are crucial for the removal process. There is one button on each side of the grab handle.
Step 3: Press and Pull
- Using the flathead screwdriver or your fingers, press the white button in. You might need to apply some force as these buttons can be a bit stubborn.
- While pressing the button, pull on the grab handle simultaneously. The handle should start to release from the dashboard.
- Repeat the process on the other side. Find the white button, press it in, and pull the grab handle out.
Step 4: Remove the Grab Handle
- Once both buttons are pressed and the handle is loose, you can completely remove the grab handle from the dashboard.
- The handle should come out smoothly once both sides are disengaged.
Tips and Tricks:
- Be patient with the white buttons. They may require a bit of force, so take your time to ensure you don't damage any parts.
- If you're having trouble, double-check to make sure you're pressing the buttons correctly and pulling at the same time.
Conclusion
Removing the grab handle from your 99-06 Silverado, Sierra, Suburban, Tahoe, Yukon, or Avalanche is a straightforward process with the right tools and a bit of patience. By following these steps, you’ll have the handle off in no time, making it ready for any modifications or repairs you have planned. This step is essential for installing our DashSkin Dash Cover on these models.